Dynamic modeling and analysis of wind turbine drivetrain considering the effects of non-torque loads

Abstract

With the increase of the rotor diameter and the deterioration of operating conditions, modern wind turbines suffer from more and more significant time-varying non-torque loads, which increases the burden of turbine structures especially the gearbox. Based on an aeroelastic loose coupling approach and assembly of the finite element method, an integrated drivetrain coupling analysis model including blade module, aerodynamic module, and gearbox module is established in this study. This proposed model is validated by comparing the calculation results with previous literature. Taking National Renewable Energy Laboratory 5-MW wind turbine as the research object, the gearbox vibration responses, gear meshing forces and bearing forces under non-torque loads caused by blade gravity, wind shear (WS), tower shadow (TS) and yawed inflow are studied in detail. Results show that the y-direction displacements of the gearbox, sun gear 1, sun gear 2 and gear are larger than those in x-direction because Fy or Mx generated by blade gravity, WS and TS dominates the non-torque loads. The non-torque loads lead to a non-uniform planet load sharing especially for the planetary gear stage 1. Because of the fluctuations of non-torque loads, not only the rotation frequencies of the corresponding carrier but also the multiple frequencies of the carrier 1 are observed in the frequency spectrums. The non-torque loads are mainly borne by carrier 1 bearings. Except for the blade gravity, the bearing forces caused by other unsteady inflows have obvious fluctuations.