Dynamic Compaction of Collapsible Soils Based on U.S. Case Histories

Abstract

Dynamic compaction (DC) is an economical approach for mitigating the hazard posed by collapsible soils particularly when they are deeper than 3–4 m. In this paper, case histories are provided for 15 projects at 10 locations in the United States where collapsible soils were treated with DC. For each site the soil properties, compaction procedures, and subsequent improvement are summarized. Although cohesionless and low-plasticity collapsible soils were successfully compacted, clay layers in the profile appeared to absorb energy and severely reduced compaction effectiveness. Correlations are presented for estimating the maximum depth of improvement, the degree of improvement versus depth, the depth of craters, and the level of vibration based on measurements made at the various sites. The compactive energy per volume was typically higher than for noncollapsible soils because collapsible soils are usually loose but relatively stiff. The maximum depth of improvement was similar to that for noncollapsible soils; however, significant scatter was observed about the best-fit line. Improvement was nonuniform with nearly 80% of the total improvement occurring within the top 60% of the improvement zone. The crater depth was related to a number of factors besides the drop energy including the number of drops, drop spacing, and contact pressure. The peak particle velocities were typically lower than those for noncollapsible soils at shorter distances, but the vibrations attenuated more slowly with distance.