Abstract
Hydrogen can be released from ammonia (NH3) by cracking, but the residual ammonia is harmful to polymer exchange membrane fuel cells and should be less than 0.1 ppm (μmol/mol). In this paper, the adsorption of NH3 by commercial faujasite (FAU) zeolites to below 0.1 ppm have been investigated. The results show that the Si/Al ratio of zeolite is inversely proportional to the adsorption capacity, and the strength of ammonia adsorption by cation Li+ is more than that of Na+, thus the ammonia adsorption capacity of LiLSX zeolite is greater than that of 13X–HP zeolite. However, the small granule size of crystalline microspheres and the rough surface of 13X–HP zeolite were the factors that lead to the dynamic NH3 adsorption capacity of 13X–HP zeolite close to LiLSX zeolite. In the dynamic 1700 ppm NH3 adsorption, with a breakthrough point of 0.1 ppm, the adsorption capacity is 9.27 wt% for LiLSX zeolite and 8.73 wt% for 13X–HP zeolite.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
