Abstract
Abstract The Light Water Reactor (LWR) dynamics code DYN3D is extended and adopted for the application to block-type High Temperature Gas-Cooled Reactor (HTGR). A procedure for the cross section generation for the HTGR core calculations was developed. The modified Reactivity-Equivalent Physical Transformation (RPT) approach is applied in order to eliminate the double-heterogeneity of HTGR fuel elements in the deterministic lattice calculations. A full core analysis of the reference simplified HTGR core is performed with DYN3D using macroscopic nodal cross sections provided by HELIOS. The SP3 transport approximation is integrated into the multi-group DYN3D code to take anisotropy of the neutron flux and heterogeneity of the core more precisely into account. The SP3 method was developed for hexagonal geometry of the graphite blocks, where the hexagons are subdivided into triangular nodes. A 3D heat conduction module coupled with a channel-type coolant flow model is implemented into the code. It is shown that there is significant redistribution of the produced heat by heat conduction between the graphite blocks.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
