Development of L-Bent Positron Detectors for μSR Applications at China Spallation Neutron Source

Abstract

A 128-channel positron detection system will be constructed at Experimental Muon Source (EMuS) of China Spallation Neutron Source (CSNS) to conduct muon spin rotation/relaxation/resonance ( μSR) measurements. Each detector channel consists of a scintillator, a light guide, and a photomultiplier tube (PMT). The long light guide is bent to an “L” shape to propagate optical photons from the scintillator to the PMT. A series of Geant4 simulations and experiments has been performed to optimize the light collection performance of the L-bent detector. Geometry deformation induced by the bending process has been well modeled. Simulation results agree with the experimental tests. Accordingly, a novel hybrid wrapping method (scintillator with polytetrafluoroethylene (PTFE) and light guide with aluminum tape) has been developed to improve the amplitude of detector signals greatly. Compared to wrapping the detector with merely PTFE tapes or aluminum tapes, this method leads to an enhancement in light collection efficiency of 73% or 14%, respectively. Two optimally manufactured prototype detectors using the novel wrapping method have been tested at the ISIS Muon Facility. The beam tests demonstrated that the L-bent detectors can precisely measure the behavior of muon spins inside samples. Therefore, the L-bent detector design is competent for μSR applications at CSNS/EMuS.