Development of Design Analysis Methods for Carbon Silicon Carbide Composite Structures

Abstract

The stress—strain behavior at room temperature and at 1100° C (2000°F) is measured for two carbon fiber-reinforced silicon carbide (C/SiC) composite materials: a two dimensional (2D) plain-weave quasi-isotropic laminate and a 3D angle interlock woven composite. Previously developed micromechanics-based material models are calibrated by correlating the predicted material property values with the measured values. Four-point beam-bending subelement specimens are fabricated with these two fiber architectures and four-point bending tests are performed at room temperature and at 1100°C. Displacements and strains are measured at the mid-span of the beam and recorded as a function of load magnitude. The calibrated material models are used in concert with a nonlinear finite-element solution using ABAQUS to simulate the structural response of the two materials in the four-point beam bending tests. The structural response predicted by the nonlinear analysis method compared favorably with the measured response for both materials and both test temperatures. Results show that the material models scale-up fairly well from coupons to subcomponent level.