Abstract

A simple, rapid, and sensitive high performance liquid chromatographic method with UV detection has been developed for the quantification of clopidogrel in human plasma and pharmaceutical dosage form using diclofenac sodium as an internal standard and validated according to standard guidelines. The separation of clopidogrel and diclofenac sodium was achieved using Hypersil BDS RP18 (250 × 4.6 mm, 5 µm) at a column oven temperature of 35°C. The methanol and phosphoric acid 25 mM (80:20, v/v) (pH 3.0), used as a mobile phase in the isocratic mode was pumped at a flow rate of 1.2 mL min−1 and eluents were monitored at a wavelength of 220 nm. The retention times for diclofenac sodium and clopidogrel were 4.15 and 4.62 min, respectively. Extraction of drug from plasma was carried out with diethyl ether. The limit of detection (LOD) was 2.0 ng mL−1, while limit of quantification (LOQ) was 5.0 ng mL−1. The calibration curves were linear (r2 = 0.999) over the concentration range of 0.005 to 5.0 µg mL−1 for both standard solutions and spiked plasma. The intra-day and inter-days precision (RSDs) was less than 4.08 and 6.38%, respectively, and the accuracy was more than 99%. The method could be applied for the pharmacokinetic study of clopidogrel in healthy human volunteers as well as to pharmaceutical dosage forms.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.