Abstract
Different methods for treatment of leachate from a municipal solid waste (MSW) landfill were tested in a pilot plant. Raw leachate was pre-treated with aeration and sedimentation, followed by several parallel individual steps such as bioremediation, chemical oxidation, ozonation, and geo-bed filters. The efficiency of different treatment steps was evaluated according to one previously developed protocol, which includes measurements of several parameters such as conductivity, pH, nutrients, chloride, metals, organic compounds, and acute toxicity before and after a treatment step. The treatment steps which showed the highest efficiency towards organic pollutants in leachate were ozone treatment and chemical oxidation. The use of an adsorption filter, a geo-bed with a mixture of peat and bottom ash with ca 10% remaining carbon, also had good effects. A combination of pre-treatment and a geo-bed filter with peat and carbon ash gave the best overall treatment results when water-quality parameters such as total organic carbon and ammonia-nitrogen were also considered.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Environmental Analytical Chemistry
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
