Abstract
AbstractGillnets are one of the most widely used fishing gears, but there is limited knowledge about their habitat effects, partly due to the lack of methodology to quantify such effects. A stereo imaging method was identified and adapted to quantify the dynamic behaviour of gillnets in-situ. Two cameras took synchronized images of the gear from slightly different perspectives, allowing to estimate the distance from the observation unit to the gear such as in the human 3D vision. The sweeping motion on the seabed and the penetration into the sediment of the leadline of light and heavy commercial bottom gillnets deployed in sandy habitats in the Danish coastal plaice fishery were assessed. The direct physical disruption of the seabed was minimal as the leadline was not penetrating into the seabed. Direct damage to the benthos could however originate from the sweeping movements of the nets, which were found to be higher than usually estimated by experts, up to about 2 m. The sweeping movements were for the most part in the order of magnitude of 10 cm, and resulted in a total swept area per fishing operation lower than any of the hourly swept area estimated for active fishing gears. Whereas the general perception is that heavy gears are more destructive to the habitat, light nets were moving significantly more than heavy ones. The established methodology could be further applied to assess gear dynamic behaviour in situ of other static gears.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.