Determining Young’s modulus of timber on the basis of a strength database and stress wave propagation velocity I: an estimation method for Young’s modulus employing Monte Carlo simulation

Abstract

In this article, we report on an estimation method for Young’s modulus that entails measuring only the stress wave propagation velocity of timber built into structures such as wooden buildings. Methods of estimating Young’s modulus that use the stress wave propagation velocity and characteristic frequency of timber in conjunction with timber density have long been used. In this article, we propose a method of easily and accurately estimating Young’s modulus from the stress wave propagation velocity without knowing the timber density. This method is based on a database of wood strength performance and density accumulated from a variety of research data and the method estimates Young’s modulus by a simulation method. We compared the Young’s moduli estimated by this method with those obtained by the bending test and by the measurement of the stress wave propagation velocity and density, and found similar results. This coincidence suggests that the method of estimating Young’s modulus presented in this article is valid. For example, the method is effective for convenient evaluation on site when determining whether a wooden building’s structural components should be reused or replaced when repairing or remodeling a building.