Abstract
Analysis of 3-μm-thick ZrN, TiN, and ZrTiN ceramic coatings on a high-speed steel substrate by laser ablation inductively coupled plasma atomic emission spectrometry (LA-ICP-AES) is described. A Nd:YAG laser was used in the Q-switched mode and operated at 355 nm and 5 mJ. Ablation patterns were obtained on the target surface by moving the ablation chamber with respect to the laser beam by means of an X-Y translator. Control of the depth of penetration was obtained by successively performing a limited number of cycles. Transient signals were obtained and their peak areas were used for the construction of calibration graphs based on the concentrations determined by energy-dispersive X-ray (EDX) analysis. An erosion rate of 0.1 μm per cycle was observed. Crater shape and depth, temporal behavior, and reproducibility of the signals are described.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
