Determination of bismuth in ores, concentrates and non-ferrous alloys by atomic-absorption spectrophotometry after separation by diethyldithiocarbamate extraction or iron collection

Abstract

Two simple, reliable and moderately rapid atomic-absorption methods for determining trace and minor amounts of bismuth in copper, nickel, molybdenum, lead and zinc concentrates and ores, and in non-ferrous alloys, are described. These methods involve the separation of bismuth from matrix elements either by chloroform extraction of its diethyldithiocarbamate (DDTC) complex, at pH 11.5–12.0, from a sodium hydroxide medium containing citric acid, tartaric acid, EDTA and potassium cyanide as complexing agents, or by co-precipitation with hydrous ferric oxide from an ammoniacal medium. Bismuth is ultimately determined, at 223.1 nm after evaporation of the extract to dryness in the presence of nitric and petchloric acids and dissolution of the salts in 20% v/v hydrochloric acid, or by dissolution of the hydrous oxide precipitate with the same acid solution, respectively. Results obtained by both methods are compared with those obtained spectrophotometrically by the iodide method after the separation of bismuth by DDTC and xanthate extractions.