Abstract
AbstractThe use of bottled water is increasing every day even after the reported presence of microbial and other contaminants. The present study analyzed bromate in bottled water samples collected from four major cities in Kerala, India. It was found that about 40% of the samples contain bromate with a maximum concentration of 9.68 μg/L with an average of 1.56 μg/L. The study also includes the development of a multilayer membrane for the removal of bromate from water. Bilayers of quaternary chitosan salt (QCS)/sodium polystyrene sulfonate (PSS) were deposited on polyethersulfone (PES) microfiltration membrane and which are employed for bromate removal studies. Deposition of six bilayers of QCS/PSS increased the rejection efficiency from ∼4% to ∼84%. The influence of different fabrication and feed parameters on bromate removal efficiency was also studied. Six bilayers of QCS/PSS deposited at pH 2 with 0.5 M NaCl were found to be effective in removing > 90% of bromate from marketed bottled water samples with low energy expense. This study is recommended to implement such a multilayer system as a polishing step in the final stage of water purification in bottling plants to avoid possible contamination and toxicity of bromate in bottled water users.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
