Design Review & Preliminary Testing for a Biomimetic Absorbable Ligament Anchor

Abstract

Review of current Anterior Cruciate Ligament (ACL) anchor technologies indicates that many devices facilitate osteointegration but not soft tissue in-growth. The design and preliminary testing of a novel biomimetic in-situ dilating bioabsorbable ACL anchor for simultaneous soft and hard tissue attachment is the subject of this study. The anchor method for this concept has been developed to mimic the mechanical-key configuration observed in a hair root. Reviewed anchor devices are typically interference screw-based. Screw anchors can lead to unnecessary ligament pre-stress, tearing during deployment and poor graft-bone contact. This work demonstrates a new fixation concept specifically developed for use with devices consisting of temperature-sensitive glass-reinforced-glass (GRG) soft tissue conductive biomaterial. Ligament anchorage is accomplished by dilation of the device into the base of a hair-root shaped osteotomy where a ligament with a collar and self tightening knot is inserted beforehand. This method facilitates full ligament-to-bone contact at the osteotomy zone where critical physiological ligament anchorage develops. Ligament pull-out loads equivalent to published results for conventional anchors were achieved using graft analogue. Testing with porcine ligaments resulted in a substantial reduction in ligament pull-out loads. Tibia bone sample constraints combined with the unraveling of the ligament knot were identified as primary factors for low pull-out loads for the porcine ligament tests. Subsequent design iterations will employ a reduction in prototype dimensions in addition to the use of a suture to lock the ligament knot. The hair-root shaped osteotomy and ligament anchor knot elements of this approach may be translated to other fixation systems and methods. By improving macro-mechanical-key interaction between the anchor, bone and ligament, further increase in pull-out forces may be achieved without unnecessary ligament pre-stress and tear damage caused by conventional interference screw threads.