Abstract
Abstract Computational and experimental studies have been performed to investigate the effects of current collector design on the performance of microfluidic fuel cell (MFC) with flow-through porous electrodes. Characteristics of electron transport in MFC with flow-through porous electrodes are investigated based on a three-dimensional computational model. The lateral electron transport in the porous electrode is found to encounter high resistance. To improve the cell performance, influences of different current collector design parameters on the transport resistances are examined. Physical origins for the influences of different design parameters are also discussed. The results demonstrate that current collector position is the most influential factor due to the non-uniform flow rate distribution. In the experimental study, cell performances revealed maximum power density when current collectors were located at the high flow rate region. An increase of 61% was observed when the current collectors moved from the conventional exposed ends of the electrodes to the high flow rate regions in the electrode active area. Based on the results, some general rules are set for the current collector designs of MFCs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
