Design of a tunable electromagnetic vibration absorber for transient vibration suppression under impulse

Abstract

Vibration absorbers usually aim to control the steady-state vibration of harmonic excitation based on the traditional fixed point theory, but few efforts focus on suppressing the transient vibration caused by impulse excitation. In this paper, the excitation is regarded as impulse in modeling, and it can be used for impulse excitation. Thus, the transient vibration absorber is designed to control the transient vibration, and the stiffness of the absorber is a key factor to control the response of the primary system. This paper presents a tunable electromagnetic transient vibration absorber to avoid direct mechanical contact for the absorber. The analytical results of the transient response indicate that the vibration can be attenuated by adjusting the stiffness of the absorber. In order to establish the model of the electromagnetic stiffness, the absorber is divided into three equivalent virtual springs. The circular current loop is equivalent to the rectangular current loop to show the spatial distribution of the magnetic flux density in the air gap. The experimental tests demonstrate that the transient vibration of the primary system can be attenuated by 13% when the current of the coil is 6 A.