Abstract
This paper presents proposal of a five-level LLC resonant DC–DC converter design procedure for battery chargers. The five-level inverter side of the proposed converter is connected to a transform-less LLC resonant tank to ensure operating at high frequency and achieve soft switching. The proposed converter has less weight, size, and cost. It is also much simpler in terms of implementation, and has smooth energy conversion to the load. The proposed converter is designed to work within the range close to the resonant frequency, to ensure higher power density and efficiency. Thus, the range of operating frequency is set to be (91 kHz < fsw < 110 kHz), while the LLC parameters is designed to achieve resonant frequency fr = 100 kHz. Therefore, it is designed to achieve zero voltage switching (ZVS) for all switches, which enhances the efficiency as well. The theoretical analysis outcomes were confirmed by simulation studies conducted using MATLAB/SIMULINK. An experimental model was also developed and validated with 100 VDC input voltage, which delivered output power of 100 W, 48 V, with efficiency around 96.9%. Selected findings are presented to confirm the effectiveness of the suggested converter.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
