Abstract
AbstractThis article presents the design steps of a planar circularly polarized (CP) bowtie‐shaped antenna for 2.4–2.5 GHz industry, science, and medicine band. Using these design steps, an antenna model is developed. The antenna design is extensively described, simulated, measured, and analyzed. The antenna is simulated using the HFSS software and produced by laser etching of copper on a low‐cost Taconic RF‐35 substrate. The presented method of this design is easy to fabricate and is tunable to different frequencies. The produced CP planar antenna has a size of 55 × 55 × 0.25 mm3, a measured axial ratio bandwidth ranging from 2.33 to 2.49 GHz, and a measured peak gain of 3.21 dBiC. The produced antenna is fully planar, compatible with the printing process and thus suitable for Internet of Things applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.