Abstract
Responding to a request by the user community for higher beam intensities, an upgrade of the Argonne National Laboratory ECR2 ion source is in progress. The upgrade has three main constraints: 1) The overall source architecture as defined by the solenoid coils cannot change, 2) radial access to the plasma chamber has to be maintained, and 3) the amount of time the source can be shut down for hardware installation is < 2 months. A new NdFeB open hexapole is projected to produce a 1.19 T wall field (r = 38.1 mm) with six radial slots (6.35 mm x 91.2 mm) allowing solid material access and ∼120 l/s of pumping to the plasma chamber. The axial magnetic fields will be enhanced with a vanadium permendur plug and optimization of the iron resulting in a magnetic field at injection Binj of 2.4 T, magnetic field at center Bmin of 0.4 T, and magnetic field at extraction Bext of 1.0 T and magnetic gradients Bgrad of 5.9 T/m for 14.5 GHz and 7.4 T/m for 18 GHz. The plasma is currently heated with multiple-frequency RF provided by two traveling wave tube amplifiers (TWTA) operating between 11 and 14.5 GHz and capable of providing 1100 W total power. The new magnetic structure will support 18 GHz operation with RF provided by a new TWTA.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
