Design and analysis of enhanced capacitive radio frequency MEMS switch based on Nb2O5 and HfO2 dielectric for satellite payload applications

Abstract

AbstractAn innovative capacitive radio frequency MEMS shunt switch with a unique shaped spring is designed and analyzed using COMSOL Multiphysics 5.4. The proposed switch using Hafnium oxide (HfO2) and Niobium pentoxide (Nb2O5) as the dielectric material between the transmission line and the deflecting gold membrane provides certain advantageous benefits with respect to performance parameters such as low actuation voltage, less spring constant, good isolation, low insertion loss, small size, and high capacitance ratio compared to other designs. A combination of three‐turn meander and C‐ shaped spring having a spring constant of 0.186 N/m helps in achieving convenient actuation voltage. For 1, 1.5, and 2 μm air gaps, the actuation voltages required to bring the switch to ON mode are 1.77, 3.24, and 4.96 V respectively with Nb2O5 as the dielectric layer and 1.8, 3.28, and 5.01 V respectively with HfO2 as the dielectric layer respectively. At 2‐μm air gap, the capacitance ratio is 329 for Nb2O5 and 113 for HfO2. RF analysis using ANSYS HFSS software shows the isolation of −19.41 dB at 11 GHz and insertion loss as low as −0.27 dB at 15 GHz. The proposed switch operating within the range of 1 to 30 GHz gives optimum results compared to other devices and is suitable for wireless communication and satellite payload applications.