Abstract
AbstractThe pulsed plasma polymerization of allylamine and cyclopropylamine is investigated to study the influence of the precursor chemical structure on the process selectivity toward the primary amine groups. Both systems are compared under similar mean powers injected in the discharges (Pmean). The results reveal an increase in the precursor fragmentation in the plasma and a decrease in the primary amine content of the film (%NH2) as Pmean increases. Nevertheless, below a critical Pmean value, different behaviors are observed depending on the precursor, cyclopropylamine being less plasma‐fragmented than allylamine. As a result, plasma polymer films (PPF) synthesized from cyclopropylamine yield the largest %NH2. These results are rationalized with the help of theoretical calculations pointing to a preferential opening of the cyclopropylamine ring structure. Cyclopropylamine activation in the plasma can thus be achieved without fragmentation reactions, leading to a more efficient incorporation of the NH2 group of the precursor in the PPF.magnified image
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.