Degradation of o-dichlorobenzene by DBD-NTP co-modified titanium gel catalyst

Abstract

In order to study the degradation process of dioxins in industrial flue gas, the decomposition of o-dichlorobenzene (o-DCB) in a DBD plasma catalytic reactor was investigated. The results showed that an NTP-catalyzed system, especially using the CuMnTiOx catalyst, had better o-DCB degradation performance compared to plasma alone. The combination of the CuMnTiOx catalyst with NTP can achieve a degradation efficiency of up to 97.2% for o-DCB; the selectivity of CO and CO2 and the carbon balance were 40%, 45%, and 85%, respectively. The dielectric constant and electrical property results indicated that the surface discharge capacity of the catalysts played a major role in the degradation of o-DCB, and a higher dielectric constant could suppress the plasma expansion and enhance the duration of the plasma discharge per discharge cycle. According to the O1s XPS and O2-TPD results, the conversion of CO to CO2 follows the M-v-K mechanism; thus, the active species on the catalyst surface play an important role. Moreover, the CuMnTiOx and NTP mixed system exhibited excellent stability, which is probably because Cu doping improved the lifetime of the catalyst. This work can provide an experimental and theoretical basis for research in the degradation of o-DCB by plasma catalyst systems.