Deformability design of high‐performance concrete beams

Abstract

SUMMARYThe use of high‐performance materials (HPMs) such as high‐strength concrete (HSC) and high‐strength steel (HSS) is becoming more popular in the construction of beams and columns of tall buildings. These HPMs not only increase the stiffness and decrease the strength‐to‐weight ratio, but also provide a more sustainable construction method by minimising the construction materials needed. However, HSC and HSS are more brittle than normal‐strength concrete and steel, respectively. Therefore, it will adversely affect the deformability of concrete beams. To evaluate the pros and cons of adopting HPM in beam design, the author will investigate the flexural strength and deformability of concrete beams made of HPMs. The deformability in this study is expressed in normalised rotation capacity and investigated by a parametric study using nonlinear moment–curvature analysis taking into account the degree of reinforcement, confining pressure, concrete and steel yield strength. From the results, it is evident that the deformability of concrete beams increases as the degree of reinforcement decreases or confining pressure increases. However, the effects of concrete and steel yield strength depend on other factors. For practical design purpose, charts and formulas are produced for designing high‐performance concrete beams to meet with specified flexural strength and deformability requirement. Copyright © 2011 John Wiley & Sons, Ltd.