Abstract
The FeCl3-containing Lewis-acidic ionic liquids (ILs) [C6mim]Cl/FeCl3(1:1.5), [C6mim]Cl/FeCl3(1:2), [C8mim]Cl/FeCl3(1:1.5), and [C8mim]Cl/FeCl3(1:2) were used as extractants for desulfurization of model fuel and gasoline fuel, respectively. The results demonstrate that these ILs are effective for the removal of sulfur compounds from model fuel under different mass ratio of IL to model fuel (1:1, 1:3, 1:5, 1:10) at 25°C. The extractive performance of ILs increased as the molar ratio of FeCl3 to [Cnmim]Cl(n = 6, 8) varied from 1:1 to 1:2. The selectivity of sulfur compounds by extraction process followed the order of dibenzothiophene (DBT)>benzothiophene (BT) > 4,6-dimethyldibenzothiophene (4,6-DMDBT). The sulfur removal of gasoline fuel containing sulfur content of 440.3 ppmw could be up to 85.8%; that is to say that the sulfur content of gasoline fuel varied from 440.3 ppmw to 62.4 ppmw after one extraction stage. Moreover, the [C6mim]Cl/FeCl3(1:2) can be recycled for at least 4 times with a little decrease in the desulfurization activity.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
