Abstract
A sensor head consisting of an all single-mode fiber (SMF) in-line Mach–Zehnder interferometer (MZI) with an embedded fiber Bragg grating (FBG) is proposed and experimentally demonstrated for simultaneous measurement of curvature and temperature. It is fabricated by cascading two bulge-taper fusion structures in a section of SMF including an FBG. The MZI is sensitive to fiber bending and ambient temperature with a sensitivity of −16.59 nm/m−1 in the range of 1.05 to 4.05 m−1 and 58 pm/°C in the range of 30°C to 100°C, respectively. However, the FBG is only sensitive to the latter with a sensitivity of 13 pm/°C. Simultaneous measurement of curvature and temperature is obtained and the cross-sensitivity issue can be solved. The experimental results show that the average relative error of the curvature is 0.38%, which is about 18 times better than that without temperature compensating. The average error of temperature is only 0.21°C.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
