Abstract
UV bonding technology’s biggest limitation is the need of a transparent joining part to be able to cure the adhesive with an external light source. This is to be solved with ribbon fabrics made with polymer optical fibres (POF) which guide the UV light into the adhesive bond. On the basis of previously published experiments, a set of POF fabrics with different thread densities and weft materials is evaluated optically regarding the emitted UV light intensity and mechanically regarding the shear strength of the adhesive bonds. A factorial experiment plan indicates that higher tensile lap-shear strength comes with lower weft fineness and higher weft density. The maximum shear strength achieved was 8.3 MPa with potential room for improvement due to non-cohesive failure, relatively high weft densities and a comparatively low powered UV light source.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
