Abstract
This work presents conditions for hexavalent chromium (Cr(VI)) removal from aqueous solution using different sorbent materials, namely: pyrolytic ashes of an industrial sludge from wastewater treatment and roots of Typha latifolia. The sorbent materials were characterized using scanning electron microscopy (SEM) and surface area using theBrunauer-Emmett-Teller (BET) technique, before and after the contact with the chromium-containing aqueous media. An overall Cr(VI) concentration reduction of 45 % was achieved using the roots of Typha latifolia whereas in the case of pyrolytic ashes a 60 % removal was observed. The percentage removal was found to depend on the initial Cr(VI) concentration in aqueous solution, pH and temperature. The Cr(VI) uptake process was maximum at pH 2 and a temperature of 40 °C for both sorbents. These materials showed a Cr(VI) adsorption capacity that was adequately described by the Langmuir adsorption isotherm. It was demonstrated that the use of waste materials for the treatment of Cr(VI)-containing wastewater is an effective and economical alternative method.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
