Abstract

Tight gas reservoirs are rich in microscale pores and fractures. The effect of microscale gas seepage in tight sandstone matrix on gas well productivity cannot be ignored. At present, the effect of microscale gas flow on the well testing model of fractured horizontal wells has not been systematically studied. In this paper, first, the coupling influence mechanism of "multicomponent gas effect-fracture geometry characteristics" is expounded, second, a seepage model coupling the flow in the fracture and the flow in the gas reservoir is established on the fracture wall surface, and third, an unsteady pressure analysis model for fractured horizontal wells in tight gas reservoirs is established. Results show that (a) when the microscale fracture is at a quite small level, the Knudsen diffusion plays a dominant role at a wide range of pressures; (b) the mass transfer rate of multicomponent shale gas through macrofractures increases with increasing CO2 fraction; (c) the unsteady flow process is divided into six stages in turn: microscale diffusion stage, linear flow stage in fractures, linear flow stage between fractures, early radial flow stage in gas reservoirs, linear flow stage in gas reservoirs, and late radial flow stage in gas reservoirs; and (d) with an increase of dimensionless bottom-hole storage coefficient, the second and third stages of flow are gradually covered up.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.