Abstract
Creep and creep rupture behavior of an advanced silicon nitride ceramic were systematically characterized in the temperature range 1150° to 1300°C using uniaxial tensile creep tests. Absence of tertiary creep and the order‐of‐magnitude breaks in both creep rate and rupture lifetime at certain threshold combinations of stress and temperature were two characteristic features of the creep behavior observed. Thermal annealing was found to have enhanced both subsequent creep resistance and creep rupture life. The stress exponent (n) and the activation energy (Q) defined in the Norton relation were found to be 12.6 and 1645 kJ/mol for the material investigated. Both values appear to fall in the general range of those reported for other but similar types of Si3N4 ceramic materials. The stress exponent, m, equivalent to the slope of the Larson–Miller equation was found to be in the range 13 to 14.4, and that defined as p in the Monkman–Grant relation to be 0.91, based on the available experimental data. The values of m, n, and p obtained above approximately support the interrelationship of the three exponents given by p=m/n.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
