Abstract
The economic gain of replacing sand with Crushed Granite Fines in the production of concrete was investigated. Compressive strength and slump tests were performed on fresh and hardened concrete using two nominal mixes of 1:1:2 and 1:1½: 3 with the sand component being partially replaced with Crushed Granite Fines. Compressive strength values above 30 N/mm² and 35 N/mm² were obtained for nominal mixes of 1:1:2 and 1:1½: 3 respectively when sand was partially replaced with 25 - 37.5% Crushed Granite Fines. Based on the economic analysis of the test results, replacement of sand with 25 - 37.5% Crushed Granite Fines is recommended for use in concrete production.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.