Abstract
This work presents a study of the corrosion resistance as a function of the holding time on the interface generated during the process of brazing an AISI 304 to AISI 316L stainless steels by using a non-commercial Fe60Ni12Cr8P13B7 metallic glass alloy ribbon by induction heating at 1000 °C into a chamber with an Ar controlled atmosphere. Samples of the austenitic stainless steels were joined in a sandwich-like arrangement using the Fe-based metallic glass ribbon. Corrosion experiments carried out in distilled water and 3.5 wt. % sodium chloride solution revealed that the corrosion resistance was higher for samples tested in the distilled water than the latest medium for all dwell joining times, since in the former medium the samples passivated. It was also found that the highest corrosion resistance was achieved for samples joined for a dwelling time of 4 minutes.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
