Corrosion inhibition of flaky aluminium powders prepared through sol–gel process

Abstract

In order to prevent corrosion of aluminium pigment in water, coated flaky aluminium powder was prepared through the sol–gel process, in which tetraethoxysilane (TEOS) and tris(2-methoxyethoxy)vinylsilane (VTMOEO) were adopted as precursors. The influences of the dosage of precursors, ethylenediamine, water and ethanol, as well as the reaction temperature and reaction time on the corrosion inhibition efficiency were investigated. Under the optimum conditions, the corrosion inhibition efficiency reached 99.2% in alkaline media of pH 11. The analysis with SEM, FTIR, EDS and XPS showed that sol–gel coatings had successfully encapsulated on the surface of clear flaky aluminium powders.