Abstract
Medium carbon steel (AISI 1040) was one of the candidate materials for rock bolts to reinforce the borehole liners and emplacement drifts of the high-level nuclear waste repository in Yucca Mountain. The corrosion performance of this structural steel was investigated by techniques such as linear polarization, electrochemical impedance spectroscopy (EIS), and laboratory immersion tests in simulated ground waters. The corrosion rates of the steel were measured for the temperatures in the range from 25 °C to 85 °C, for the ionic concentrations of 1 time (1×), 10 times (10×), and a hundred times (100×) ground water concentration. The steel corroded uniformly at penetration rates of 35 to 200 µm/year in the deaerated waters, and at 200 to 1000 µm/year in the aerated waters. Increasing temperatures in the deaerated waters increased the corrosion rate of the steel. However, increasing ionic concentrations influenced the corrosion rate only slightly. In the aerated 1×and 10×waters, increasing temperatures increased the rates of the steel significantly. In the aerated 100×waters, the corrosion rate increased from 25 °C to 45 °C and decreased at higher temperatures (65 °C and up) due to the formation of oxide/hydroxide films and salt scales on the surface of the steel specimen. The steel suffered pitting corrosion in the both deaerated and aerated hot ground water environments after anodic polarization.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
