Correlation between Laboratory-Accelerated Corrosion and Field Exposure Test for High-Strength Stainless Steels.

Abstract

Equipment in a long-term marine atmosphere environment is prone to corrosion failure. Natural field exposure tests usually require a long time to obtain corrosion information. This study worked out a laboratory-accelerated corrosion test method that has a strong correlation with the natural environment test in Wanning, Hainan, and can be used as the basis for life assessment and the prediction of two high-strength stainless-steel materials. The mathematical model of corrosion weight loss of two high-strength stainless steels (3Cr13 and 00Cr12Ni10MoTi) was established by a field exposure test and a laboratory-accelerated corrosion test. Then, the correlation between the field exposure test and the laboratory-accelerated corrosion test was evaluated using qualitative and quantitative methods, and the acceleration ratio was calculated using the accelerated switching factor (ASF) method. The results show that: (1) The corrosion morphology of the two stainless steels after 15 days of laboratory-accelerated corrosion testing is similar to that obtained after two years of field exposure. (2) The value of gray correlation between the laboratory-accelerated corrosion test and the field exposure test is not less than 0.75. (3) The acceleration ratio of both stainless steels increases with the corrosion test time in the laboratory. The corrosion prediction models for the two stainless steels are T3Cr13 = 6.234 t1.634 and T00Cr12Ni10MoTi = 55.693 t1.322, respectively.