Abstract
AbstractThis paper revisits a complicated analytical solution of the stress intensity factor K adopted in a newly published British standard BS 8571:2014 for clamped single edge notched tension (SENT) specimens. Comparison with existing numerical results of K shows that the analytical K solution in BS 8571 is correct only for the crack length to specimen width ratio a/W ≤ 0.6, but incorrect for a/W > 0.6. A reinvestigation is thus performed using the crack compliance method, and a corrected K solution is obtained for the BS 8571 clamped SENT specimens over the full range of a/W. On this basis, a simple closed‐form solution of K is obtained using the best curve fitting with an accuracy within 1% for crack sizes up to a/W = 0.98. Results show that the proposed closed‐form solution of K agrees well with the numerical results of K for the clamped SENT specimens.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Fatigue & Fracture of Engineering Materials & Structures
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.