Abstract
Abstract. Coupled hydrological-hydrogeological models, emphasising the importance of the stream–aquifer interface, are more and more used in hydrological sciences for pluri-disciplinary studies aiming at investigating environmental issues. Based on an extensive literature review, stream–aquifer interfaces are described at five different scales: local [10 cm–~10 m], intermediate [~10 m–~1 km], watershed [10 km2–~1000 km2], regional [10 000 km2–~1 M km2] and continental scales [>10 M km2]. This led us to develop the concept of nested stream–aquifer interfaces, which extends the well-known vision of nested groundwater pathways towards the surface, where the mixing of low frequency processes and high frequency processes coupled with the complexity of geomorphological features and heterogeneities creates hydrological spiralling. This conceptual framework allows the identification of a hierarchical order of the multi-scale control factors of stream–aquifer hydrological exchanges, from the larger scale to the finer scale. The hyporheic corridor, which couples the river to its 3-D hyporheic zone, is then identified as the key component for scaling hydrological processes occurring at the interface. The identification of the hyporheic corridor as the support of the hydrological processes scaling is an important step for the development of regional studies, which is one of the main concerns for water practitioners and resources managers. In a second part, the modelling of the stream–aquifer interface at various scales is investigated with the help of the conductance model. Although the usage of the temperature as a tracer of the flow is a robust method for the assessment of stream–aquifer exchanges at the local scale, there is a crucial need to develop innovative methodologies for assessing stream–aquifer exchanges at the regional scale. After formulating the conductance model at the regional and intermediate scales, we address this challenging issue with the development of an iterative modelling methodology, which ensures the consistency of stream–aquifer exchanges between the intermediate and regional scales. Finally, practical recommendations are provided for the study of the interface using the innovative methodology MIM (Measurements–Interpolation–Modelling), which is graphically developed, scaling in space the three pools of methods needed to fully understand stream–aquifer interfaces at various scales. In the MIM space, stream–aquifer interfaces that can be studied by a given approach are localised. The efficiency of the method is demonstrated with two examples. The first one proposes an upscaling framework, structured around river reaches of ~10–100 m, from the local to the watershed scale. The second example highlights the usefulness of space borne data to improve the assessment of stream–aquifer exchanges at the regional and continental scales. We conclude that further developments in modelling and field measurements have to be undertaken at the regional scale to enable a proper modelling of stream–aquifer exchanges from the local to the continental scale.
Highlights
The emergence of a systemic view of the hydrological cycle led to the concept of continental hydrosystem (Dooge, 1968; Kurtulus et al, 2011), which “is composed of storage components where water flows slowly and conductive components, where large quantities of water flow relatively quickly” (Flipo et al, 2012, p. 1)
The aim of this paper is to pave the way towards a multiscale modelling of the stream–aquifer interface, with the ambitious goal of being able to simulate the complexity of the processes occurring at the local scale in larger scale models, i.e. at the regional scale for large basin decision makers, and at the continental scale, which is the primary scale of interest for the assessment of the effect of climate change on hydrosystems
The outcome is the MIM methodological tool, which localises in space the type of stream–aquifer interface that can be studied by a given approach (see the five scales of interest in Fig. 4: local, intermediate, watershed, regional and continental scales)
Summary
The emergence of a systemic view of the hydrological cycle led to the concept of continental hydrosystem (Dooge, 1968; Kurtulus et al, 2011), which “is composed of storage components where water flows slowly (e.g. aquifers) and conductive components, where large quantities of water flow relatively quickly (e.g. surface water)” (Flipo et al, 2012, p. 1). The aim of this paper is to pave the way towards a multiscale modelling of the stream–aquifer interface, with the ambitious goal of being able to simulate the complexity of the processes occurring at the local scale in larger scale models, i.e. at the regional scale for large basin decision makers, and at the continental scale, which is the primary scale of interest for the assessment of the effect of climate change on hydrosystems. Based on a literature review, we include the hydrologic spiralling concept of Poole et al (2008) – which denotes the complexity of water pathways in heterogeneous alluvial plains – into the nested groundwater pathways vision of Tóth (1963) to formulate the concept of nested stream–aquifer interfaces This concept allows us to identify stream–aquifer interfaces as a key transitional component of continental hydrosystems We conclude that further developments in modelling and field measurements have to be performed at the regional scale to enable the proper modelling of stream–aquifer exchanges from the local to the continental scale
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.