Abstract
This project aims for the construction and implementation of the Coaxial probe feed microstrip array antenna for radar applications. As the Continuous Wave Frequency Modulated (CWFM) radar can together transfer and to accept the signals, whatever that can be used for a bistatic radar for consideration of weather and temperature. The single patch, 1x4, 2x2, 4X4 coaxial probe feed is to design at a frequency of 1.48GHz by using RT duriod (r = 2.2) dielectric substrate for a bandwidth of 15MHz. For Microstrip antenna array elements is to connect with inter-component configuration of 0.8λ. in both horizontal and vertical directions. The microstrip patch array antenna was constructed and implemented by using HFSS (High Frequency Structure Simulator) and comparison of various descriptions of array antennas by using feeder network in circuit construction and to check the isolation between the two antennas for bistatic radar.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Innovative Technology and Exploring Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
