Concrete-Filled, Glass Fiber-Reinforced Polymer Dowels for Load Transfer in Jointed Rigid Pavements

Abstract

Smooth, round steel dowels have been used for nearly a century to transfer wheel loads across concrete pavement joints. Dowels are subjected to shear and bending stresses caused by traffic loads in addition to curling stresses caused by temperature gradients in pavement slabs. Over time, the use of deicing salts corrodes steel dowels and causes damage to concrete pavement joints. Alternative dowel materials, such as stainless steel and glass fiber-reinforced polymer (GFRP), have been introduced in recent years. The dominant size of dowels for highway pavements has remained the same, typically 38 mm in diameter, and costs can be considerably higher for stainless steel compared with epoxy-coated steel dowels of the same size. Experimental tests at the University of Manitoba, Canada, examined the performance of four dowel types, including the standard 38-mm epoxy-coated steel; 38-mm solid, pultruded GFRP dowels; and 50-mm and 63.5-mm concrete-filled GFRP tube dowels. The dowels were cast in small concrete sl...