Concentrated HCl Catalyzed 5-(Chloromethyl)furfural Production from Corn Stover of Varying Particle Sizes

Abstract

5-(Chloromethyl) Furfural (CMF) is a potential chemical building block for replacing petroleum-derived chemicals derived from lignocellulosic feedstocks. In this study, hand harvested corn stover and mechanically forage chopped corn stover was processed in a 1 L hydrolysis reactor to produce CMF in a biphasic, two solvent system. Both 1,2 dichloroethane (DCE) and dichloromethane (DCM) were tested as organic solvents. The results showed that DCE performed better than DCM due to temperature and pressure limitations of the reactor system. Using DCE as the extracting solvent, the effects of solids loading, particle size, and moisture content of the corn stover on the hydrolysis efficiency were determined. One liter acid hydrolysis reactor provides consistent and reproducible yields of 63% CMF from hand harvested corn stover as feedstock at solid loading of 10% wt/v, 100C for 1 h. For the forage chopped corn stover, increasing particle size brings an increase in the feedstock sugar content. Foraged chopped corn stover (FCCS) particle sizes larger than 19 mm (0.75 in.) results in significant reduction in CMF yield from 43 to 35%.