Computational biology for cell-free systems.

3-Amino-4-hydroxybenzoic acid (3,4-AHBA) is a non-proteinogenic aromatic compound that functions as a key biosynthetic precursor for diverse secondary metabolites with pharmaceutical and industrial value. Microbial production of 3,4-AHBA offers a sustainable alternative to petroleum-based chemical synthesis; however, metabolic complexity and trade-offs between growth and product formation constrain rational strain design. Here, genome-scale metabolic (GSM) modeling and flux balance analysis (FBA) were integrated with targeted genetic engineering to elucidate and enhance 3,4-AHBA production in Streptomyces thermoviolaceus. A genome-scale metabolic model was constructed and expanded by incorporating the nspH–nspI gene operon, which encodes the 3,4-AHBA biosynthetic pathway. In silico FBA predicted substantial rewiring of central carbon metabolism, with carbon flux redirected from glycolysis and the tricarboxylic acid cycle toward aspartate-derived intermediates and 3,4-AHBA synthesis, accompanied by reduced biomass-associated flux. Guided by these predictions, an engineered strain (St::NspHI) was developed and experimentally evaluated. Consistent with model predictions, the engineered strain exhibited lower growth rates and glucose uptake than the wild type, reflecting a metabolic burden. Nevertheless, 3,4-AHBA production was achieved exclusively in the engineered strain. Comparison of simulated and experimental fluxes revealed overestimation by FBA, likely due to secondary metabolism and incomplete genome annotation. Overall, GSM-guided design enables optimization of precursor production.

Arthrospira (Spirulina) platensis is a promising feedstock and host strain for bioproduction because of its high accumulation of glycogen and superior characteristics for industrial production. Metabolic simulation using a genome-scale metabolic model and flux balance analysis is a powerful method that can be used to design metabolic engineering strategies for the improvement of target molecule production. In this study, we constructed a genome-scale metabolic model of A. platensis NIES-39 including 746 metabolic reactions and 673 metabolites, and developed novel strategies to improve the production of valuable metabolites, such as glycogen and ethanol. The simulation results obtained using the metabolic model showed high consistency with experimental results for growth rates under several trophic conditions and growth capabilities on various organic substrates. The metabolic model was further applied to design a metabolic network to improve the autotrophic production of glycogen and ethanol. Decreased flux of reactions related to the TCA cycle and phosphoenolpyruvate reaction were found to improve glycogen production. Furthermore, in silico knockout simulation indicated that deletion of genes related to the respiratory chain, such as NAD(P)H dehydrogenase and cytochrome-c oxidase, could enhance ethanol production by using ammonium as a nitrogen source.

The excessive usage of non-renewable resources to produce plastic commodities has incongruously influenced the environment's health. Especially in the times of COVID-19, the need for plastic-based health products has increased predominantly. Given the rise in global warming and greenhouse gas emissions, the lifecycle of plastic has been established to contribute to it significantly. Bioplastics such as polyhydroxy alkanoates, polylactic acid, etc. derived from renewable energy origin have been a magnificent alternative to conventional plastics and reconnoitered exclusively for combating the environmental footprint of petrochemical plastic. However, the economically reasonable and environmentally friendly procedure of microbial bioplastic production has been a hard nut to crack due to less scouted and inefficient process optimization and downstream processing methodologies. Thereby, meticulous employment of computational tools such as genome-scale metabolic modeling and flux balance analysis has been practiced in recent times to understand the effect of genomic and environmental perturbations on the phenotype of the microorganism. In-silico results not only aid us in determining the biorefinery abilities of the model microorganism but also curb our reliance on equipment, raw materials, and capital investment for optimizing the best conditions. Additionally, to accomplish sustainable large-scale production of microbial bioplastic in a circular bioeconomy, extraction, and refinement of bioplastic needs to be investigated extensively by practicing techno-economic analysis and life cycle assessment. This review put forth state-of-the-art know-how on the proficiency of these computational techniques in laying the foundation of an efficient bioplastic manufacturing blueprint, chiefly focusing on microbial polyhydroxy alkanoates (PHA) production and its efficacy in outplacing fossil based plastic products.

Methanotrophs are of fundamental importance in the global methane cycle and hold promise for the bioconversion of methane into valuable products. This study elucidates the impact of alternating aerobic-anoxic conditions on metabolism of the two phylogenetically distinct groups of methanotrophs: Methylomonas koyamae (type I, γ-proteobacteria) and Methylocystis bryophila (type II, α-proteobacteria). Using batch cultivations with single and repeated oxygen pulses, we demonstrated that cyclic aerobic-anoxic alternation significantly increased the secretion of organic compounds. Notably, acetate secretion by the type II methanotroph M. bryophila was observed for the first time. Genome-scale metabolic modeling and flux balance analysis revealed that acetate secretion serves as an auxiliary ATP-generating pathway for M. bryophila under oxygen limitation. We further uncovered a dynamic mechanism: aerobic phases trigger methane uptake and build up intracellular organic carbon pools, while anoxic phases redirect these pools toward acetate and/or hydrogen release to sustain survival under oxygen limitation. This cyclic regimen effectively channels more methane-derived carbon into extracellular acetate. Our findings underscore that redox conditions critically shape methanotrophic metabolism, influencing both the biological methane cycle and the global climate.

Aerobic methanotrophs mediate methane oxidation contributing to a major biological sink that limits CH4 release to the atmosphere in oxygenated environments and serve as promising platforms for biotechnological applications. In natural and engineered environments, these bacteria rarely exist in isolation but form stable associations with heterotrophic satellites that utilize methanotrophic metabolites, remove inhibitory intermediates, and provide essential growth factors. Such interactions enhance methane oxidation efficiency and community stability, yet the metabolic mechanisms underlying them remain poorly resolved. This review summarizes current knowledge on both natural and synthetic aerobic methanotrophic consortia, focusing on the composition, functions, and biotechnological relevance of satellite microorganisms. We systematically examine available mathematical frameworks—from ecological and statistical models to genome-scale metabolic reconstructions and dynamic flux balance analysis—applied to methanotrophs and their satellites. Our analysis reveals that while genome-scale metabolic models have been developed for model heterotrophic species, only a few correspond to experimentally identified methanotroph satellites, and community-level reconstructions remain limited. The lack of curated and experimentally validated models restricts the predictive power of current approaches. Addressing these limitations will require not only targeted reconstruction of satellite metabolism, but also the combined use of complementary computational methods followed by experimental verification. Such an integrative strategy will be essential for understanding methanotrophic community organization and function and, more broadly, other microbial consortia with complex metabolic interactions. Addressing these limitations through targeted reconstruction of satellite metabolism and integration of existing models will be key to advancing quantitative understanding of methanotrophic community organization and function.

Genome-scale community modeling for deciphering the inter-microbial metabolic interactions in fungus-farming termite gut microbiome

This study presents a novel methodology for the development of a chemically defined medium (CDM) using genome-scale metabolic network and flux balance analysis. The genome-based in silico analysis identified two amino acids and four vitamins as non-substitutable essential compounds to be supplemented to a minimal medium for the sustainable growth of Mannheimia succiniciproducens, while no substitutable essential compounds were identified. The in silico predictions were verified by cultivating the cells on a CDM containing the six non-substitutable essential compounds, and it was further demonstrated by observing no cell growth on the CDM lacking any one of the non-substitutable essentials. An optimal CDM for the enhancement of cell growth and succinic acid production, as a target product, was formulated with a single-addition technique. The fermentation on the optimal CDM increased the succinic acid productivity by 36%, the final succinic acid concentration by 17%, and the succinic acid yield on glucose by 15% compared to the cultivation using a complex medium. The optimal CDM also lowered the sum of the amounts of by-products (acetic, formic, and lactic acids) by 30%. The strategy reported in this paper should be generally applicable to the development of CDMs for other organisms, whose genome sequences are available.

Constraint-based modeling has been applied to analyze metabolism of numerous organisms via flux balance analysis and genome-scale metabolic models, including mammalian cells such as the Chinese hamster ovary (CHO) cells—the principal cell factory platform for therapeutic protein production. Unfortunately, the application of genome-scale model methodologies using the conventional biomass objective function is challenged by the presence of overly-restrictive constraints, including essential amino acid exchange fluxes that can lead to improper predictions of growth rates and intracellular flux distributions. In this study, these constraints are found to be reliably predicted by an “essential nutrient minimization” approach. After modifying these constraints with the predicted minimal uptake values, a series of unconventional objective functions are applied to minimize each individual non-essential nutrient uptake rate, revealing useful insights about metabolic exchange rates and flows across different cell lines and culture conditions. This unconventional uptake-rate objective functions (UOFs) approach is able to distinguish metabolic differences between three distinct CHO cell lines (CHO-K1, -DG44, and -S) not directly observed using the conventional biomass growth maximization solutions. Further, a comparison of model predictions with experimental data from literature correctly correlates with the specific CHO-DG44-derived cell line used experimentally, and the corresponding dual prices provide fruitful information concerning coupling relationships between nutrients. The UOFs approach is likely to be particularly suited for mammalian cells and other complex organisms which contain multiple distinct essential nutrient inputs, and may offer enhanced applicability for characterizing cell metabolism and physiology as well as media optimization and biomanufacturing control.

The solution of Genome-Scale Metabolic Model (GSMM) directly affects the simulation accuracy of the metabolic process in digital cells. Single-objective optimization methods, such as flux balance analysis (FBA), which is widely used in solving GSMM, have limitations when simulating actual biological processes, which leads to unrealistic results due to other biological constraints being ignored. A novel multi-objective differential evolution algorithm based on general FBA (i.e., differential evolution FBA [DEFBA]) is hence proposed to solve GSMM. First, in accordance with the assumption that cells minimize resource consumption and maximize resource utilization, the maximum specific growth rate and the minimum cellular production rate of ATP, NADPH, and NADH are defined as the multi-objective functions of DEFBA. Second, FBA is used to produce the initial individuals of DEFBA by changing the upper bound of biomass reaction in GSMM. Third, mutation and selection operations help in generating new individuals in the solution space to search the Pareto front. Finally, the optimal solution is selected by analyzing the inflexion point of the Pareto front. In DEFBA, multi-objective technology and optimal solution judging technology can introduce the biological constraints into the GSMM solving method, such that the solution can be more consistent with the essential biological mechanism. DEFBA is applied to solve Aspergillus niger's GSMM. The improved results show that DEFBA can be an effective general solving algorithm for GSMM.

Microbiological studies are increasingly relying on in silico methods to perform exploration and rapid analysis of genomic data, and functional genomics studies are supplemented by the new perspectives that genome-scale metabolic models offer. A mathematical model consisting of a microbe’s entire metabolic map can be rapidly determined from whole-genome sequencing and annotating the genomic material encoded in its DNA. Flux-balance analysis (FBA), a linear programming technique that uses metabolic models to predict the phenotypic responses imposed by environmental elements and factors, is the leading method to simulate and manipulate cellular growth in silico. However, the process of creating an accurate model to use in FBA consists of a series of steps involving a multitude of connections between bioinformatics databases, enzyme resources, and metabolic pathways. We present the methodology and procedure to obtain a metabolic model using PyFBA, an extensible Python-based open-source software package aimed to provide a platform where functional annotations are used to build metabolic models (http://linsalrob.github.io/PyFBA). Backed by the Model SEED biochemistry database, PyFBA contains methods to reconstruct a microbe’s metabolic map, run FBA upon different media conditions, and gap-fill its metabolism. The extensibility of PyFBA facilitates novel techniques in creating accurate genome-scale metabolic models.

A genome-scale metabolic model of the lactic acid bacterium Lactobacillus plantarum WCFS1 was constructed based on genomic content and experimental data. The complete model includes 721 genes, 643 reactions, and 531 metabolites. Different stoichiometric modeling techniques were used for interpretation of complex fermentation data, as L. plantarum is adapted to nutrient-rich environments and only grows in media supplemented with vitamins and amino acids. (i) Based on experimental input and output fluxes, maximal ATP production was estimated and related to growth rate. (ii) Optimization of ATP production further identified amino acid catabolic pathways that were not previously associated with free-energy metabolism. (iii) Genome-scale elementary flux mode analysis identified 28 potential futile cycles. (iv) Flux variability analysis supplemented the elementary mode analysis in identifying parallel pathways, e.g. pathways with identical end products but different co-factor usage. Strongly increased flexibility in the metabolic network was observed when strict coupling between catabolic ATP production and anabolic consumption was relaxed. These results illustrate how a genome-scale metabolic model and associated constraint-based modeling techniques can be used to analyze the physiology of growth on a complex medium rather than a minimal salts medium. However, optimization of biomass formation using the Flux Balance Analysis approach, reported to successfully predict growth rate and by product formation in Escherichia coli and Saccharomyces cerevisiae, predicted too high biomass yields that were incompatible with the observed lactate production. The reason is that this approach assumes optimal efficiency of substrate to biomass conversion, and can therefore not predict the metabolically inefficient lactate formation.

BackgroundCarbon fixation through biological methanation has emerged as a promising technology to produce renewable energy in the context of the circular economy. The anaerobic digestion microbiome is the fundamental biological system operating biogas upgrading and is paramount in power-to-gas conversion. Carbon dioxide (CO2) methanation is frequently performed by microbiota attached to solid supports generating biofilms. Despite the apparent simplicity of the microbial community involved in biogas upgrading, the dynamics behind most of the interspecies interaction remain obscure. To understand the role of the microbial species in CO2 fixation, the biofilm generated during the biogas upgrading process has been selected as a case study. The present work investigates via genome-centric metagenomics, based on a hybrid Nanopore-Illumina approach the biofilm developed on the diffusion devices of four ex situ biogas upgrading reactors. Moreover, genome-guided metabolic reconstruction and flux balance analysis were used to propose a biological role for the dominant microbes.ResultsThe combined microbiome was composed of 59 species, with five being dominant (> 70% of total abundance); the metagenome-assembled genomes representing these species were refined to reach a high level of completeness. Genome-guided metabolic analysis appointed Firmicutes sp. GSMM966 as the main responsible for biofilm formation. Additionally, species interactions were investigated considering their co-occurrence in 134 samples, and in terms of metabolic exchanges through flux balance simulation in a simplified medium. Some of the most abundant species (e.g., Limnochordia sp. GSMM975) were widespread (~ 67% of tested experiments), while others (e.g., Methanothermobacter wolfeii GSMM957) had a scattered distribution. Genome-scale metabolic models of the microbial community were built with boundary conditions taken from the biochemical data and showed the presence of a flexible interaction network mainly based on hydrogen and carbon dioxide uptake and formate exchange.ConclusionsOur work investigated the interplay between five dominant species within the biofilm and showed their importance in a large spectrum of anaerobic biogas reactor samples. Flux balance analysis provided a deeper insight into the potential syntrophic interaction between species, especially Limnochordia sp. GSMM975 and Methanothermobacter wolfeii GSMM957. Finally, it suggested species interactions to be based on formate and amino acids exchanges.AQaLxbUWFz91qWxiAB1_X5Video

BackgroundThe increase in glycerol obtained as a byproduct of biodiesel has encouraged the production of new industrial products, such as 1,3-propanediol (PDO), using biotechnological transformation via bacteria like Clostridium butyricum. However, despite the increasing role of Clostridium butyricum as a bio-production platform, its metabolism remains poorly modeled.ResultsWe reconstructed iCbu641, the first genome-scale metabolic (GSM) model of a PDO producer Clostridium strain, which included 641 genes, 365 enzymes, 891 reactions, and 701 metabolites. We found an enzyme expression prediction of nearly 84% after comparison of proteomic data with flux distribution estimation using flux balance analysis (FBA). The remaining 16% corresponded to enzymes directionally coupled to growth, according to flux coupling findings (FCF). The fermentation data validation also revealed different phenotype states that depended on culture media conditions; for example, Clostridium maximizes its biomass yield per enzyme usage under glycerol limitation. By contrast, under glycerol excess conditions, Clostridium grows sub-optimally, maximizing biomass yield while minimizing both enzyme usage and ATP production. We further evaluated perturbations in the GSM model through enzyme deletions and variations in biomass composition. The GSM predictions showed no significant increase in PDO production, suggesting a robustness to perturbations in the GSM model. We used the experimental results to predict that co-fermentation was a better alternative than iCbu641 perturbations for improving PDO yields.ConclusionsThe agreement between the predicted and experimental values allows the use of the GSM model constructed for the PDO-producing Clostridium strain to propose new scenarios for PDO production, such as dynamic simulations, thereby reducing the time and costs associated with experimentation.

BackgroundGenome sequencing and bioinformatics are producing detailed lists of the molecular components contained in many prokaryotic organisms. From this 'parts catalogue' of a microbial cell, in silico representations of integrated metabolic functions can be constructed and analyzed using flux balance analysis (FBA). FBA is particularly well-suited to study metabolic networks based on genomic, biochemical, and strain specific information.ResultsHerein, we have utilized FBA to interpret and analyze the metabolic capabilities of Escherichia coli. We have computationally mapped the metabolic capabilities of E. coli using FBA and examined the optimal utilization of the E. coli metabolic pathways as a function of environmental variables. We have used an in silico analysis to identify seven gene products of central metabolism (glycolysis, pentose phosphate pathway, TCA cycle, electron transport system) essential for aerobic growth of E. coli on glucose minimal media, and 15 gene products essential for anaerobic growth on glucose minimal media. The in silico tpi-, zwf, and pta- mutant strains were examined in more detail by mapping the capabilities of these in silico isogenic strains.ConclusionsWe found that computational models of E. coli metabolism based on physicochemical constraints can be used to interpret mutant behavior. These in silica results lead to a further understanding of the complex genotype-phenotype relation.Supplementary information:

BackgroundGiven a genome-scale metabolic model (GEM) of a microorganism and criteria for optimization, flux balance analysis (FBA) predicts the optimal growth rate and its corresponding flux distribution for a specific medium. FBA has been extended to microbial consortia and thus can be used to predict interactions by comparing in-silico growth rates for co- and monocultures. Although FBA-based methods for microbial interaction prediction are becoming popular, a systematic evaluation of their accuracy has not yet been performed.ResultsHere, we evaluate the accuracy of FBA-based predictions of human and mouse gut bacterial interactions using growth data from the literature. For this, we collected 26 GEMs from the semi-curated AGORA database as well as four previously published curated GEMs. We tested the accuracy of three tools (COMETS, Microbiome Modeling Toolbox and MICOM) by comparing growth rates predicted in mono- and co-culture to growth rates extracted from the literature and also investigated the impact of different tool settings and media. We found that except for curated GEMs, predicted growth rates and their ratios (i.e. interaction strengths) do not correlate with growth rates and interaction strengths obtained from in vitro data.ConclusionsPrediction of growth rates with FBA using semi-curated GEMs is currently not sufficiently accurate to predict interaction strengths reliably.