Compressive performance of ECC-concrete encased high strength steel composite columns

Abstract

The use of high strength steel (HSS) in the construction of concrete encased steel (CES) composite columns is often limited by the strain incompatibility issue between HSS and concrete at peak-load. This study proposes an alternative approach to confine the high strength concrete with Engineered Cementitious Composite (ECC) to improve its compatibility with high strength steel. The main purpose of this study is to experimentally evaluate the axial compressive performance of the proposed composite column cross-section configuration. Behaviours of fifteen short columns including twelve ECC-CES columns are investigated in terms of failure modes, load-deformation curves, ductility and energy absorption capacity. The test parameters included ECC and concrete strengths, ECC cover thickness, steel section shape and column section’s aspect ratio. It was found that ECC generally improved the failure behaviour of high strength steel CES columns and increased the deformation and energy absorption capacity. On average ECC-CES columns showed around 12% and 8% higher ductility and toughness than control concrete column, respectively. A detailed 3D nonlinear finite element model was developed and validated against experimental results. Applicability of current design codes to predict the ultimate strength of ECC-CES columns was also evaluated. Finally, a method to calculate the ECC-CES column’s capacity considering effective material stresses at peak-load was proposed.