Compositional and structural characterization of alloyed carbide by 3D atom probe and high‐resolution TEM

Abstract

ABSTRACTDuring tempering of solute supersaturated ferrous martensite, the face‐centered cubic MC‐type carbides (M is alloy elements) such as VC and NbC phases usually co‐precipitate on crystal defects such as dislocation and take on plate‐like morphology. Over‐tempering makes the plate‐like shape change to spherical shape because of Ostwald coarsening. The coarsening process strongly correlates to the diffusion behaviors of the carbon and carbide‐forming elements, and consequently inhomogeneous compositional and structural distribution in the carbides is formed. Three‐dimensional atom probe and high‐resolution transmission electron microscopy have been proved useful methods to characterize the composition, morphology and nanostructure of the carbides that precipitate in a quench‐tempered micro‐alloyed steel. Depending on the actual affinity with C and the diffusion behavior, Si and Al are rejected from the alloy carbide, whereas Mn, V and Nb are inhomogeneously enriched in it. The morphology and structure change with the compositional redistribution. During the coarsening process of the pre‐existing plate‐like carbide, transition carbide that is semi‐coherent with ferritic matrix is formed because of the disparity in diffusion ratio of different solutes. A core–shell complex nanostructure is consequently formed in the coarsening carbide, and the core and shell are identified as V8C7 enriched in Mn, Mo and Mo2C, respectively. Copyright © 2013 John Wiley & Sons, Ltd.