Abstract
The behaviour of a pile subjected to thermo-mechanical loads was studied in situ with the aim of quantifying the thermal influence on the bearing capacity of heat exchanger piles. To accomplish this, a pile situated in a building under construction was equipped with a pipe system to inject heat into it using a special heat pump. Load cells, deformation gauges, and thermometers were installed to evaluate the behaviour of the pile during seven tests with coupled thermo-mechanical loads. The temperature variations applied to the pile were of the order of 15°C and the mechanical load reached 1300 kN. The results permitted the quantification of three significant effects brought about by the temperature increase: (i) pile uplift, (ii) mobilization of skin friction due to the relative displacement of the pile with respect to the ground, (iii) additional load generated in the pile by constrained dilation.Key words: heat exchanger pile, in situ test, loading test, thermo-mechanical loads, mobilization of skin friction.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
