Polish Society of Biomechanics Morecki&Fidelus Award Winner: Comparison of two polymers PDO and PLLA/PCL in application of urological stent for the treatment of male urethral stenosis.

Abstract

Purpose: The primary objective of the conducted research was to develop an urological stent design for the treatment of male ure-thral stenosis. Given the variable loading conditions inside the urethra, the proposed stent should maintain normal tissue kinetics and obstruct the narrowed lumen. The suitable selection for the stent material significantly influences the regeneration and proper remodeling of the urethral tissues. Methods: In this work, the mechanical characteristics of some polymer materials were studied, including: polydi-oxanone (PDO) and poly(L-lactide) (PLLA)/polycaprolactone (PCL) composite. The obtained mechanical properties for static tensile testing of the materials, allowed the determination of such parameters as Young's modulus (E), tensile strength (R m) and yield strength (R e). Subsequently, the design of a urological stent was developed, for which a numerical analysis was carried out to check the behaviour of the stent during varying loads prevailing in the urethra. Result: The research indicated that PDO has better mechanical properties than the proposed PLLA/PCL composite. The numerical analysis results suggested that the developed stent design can be successfully used in the treatment of male urethral stenosis. The obtained stress and strain distributions in the numerical analysis confirm that the PDO material can be used as a material for an urological stent. Conclusions: The biodegradable polymers can be successfully used in urology. Their advantages over solid materials are their physicochemical properties, the ability to manipulate the rate and time of degradation and the easy availability of materials and manufacturing technology.