Abstract
Dye-sensitized Solar Cell (DSSC) is a solar cell that has great potential in the future because of the cheaper cost of fabrication and environmentally friendly basic ingredients. This study aims to determine the effect of type of screen on the TiO2 layer as the active electrode DSSC. The active electrode TiO2 based DSSC fabricated by the method of double layer. Efficiency Dye-sensitized Solar Cell (DSSC) can be obtained from the current-voltage curve I-V meter. Nanofiber on the nanoparticles can reach a highest efficiency of DSSC about 0,015%. The second variation of between nanofiber-nanoparticle layering, and nanoparticle-nanofiber, it appears that the nanofiber layer of nanoparticles above, no significant changes, namely in 10 minutes η = 0.014965; 15 minutes η = 0.011021 and 20 minutes η = 0.013332. This is demonstrated by the nature of the dominant nanofiber as a photon trap covered by the nature of the dominant nanoparticles absorb the dye, so that overtime does not affect the incoming electron. While the results of nanofiber layer on the nanoparticles changed significantly in the variation of 20 minutes, ie η = 0.00283. You can also see the most optimum time was 15 minutes, which is η = 0.01559. This may be due in this 15 minute nanofiber coating has a thickness that is optimum so that electrons can reach the electrode diffuse due to the interaction between photons and the dye more.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
