Abstract
Removal of natural organic matter (NOM) is one of the most important objectives of water treatment plants but reducing these pollutants either present in water as dissolved or suspended form is not as efficient as is required in conventional treatment plants. The purpose of this study was comparison performance of composite polyaluminum silicate chloride (PASiC) and electrocoagulation (EC) process by aluminum electrodes in NOM removal from raw surface water. In this study, the effects of turbidity, total organic compounds (carbons) (TOC), adsorption at a wavelength of 254 nm (UV254), chemical oxygen demand (COD), alkalinity, residual aluminum in finished water by application of EC process and PASiC were investigated. The results demonstrate that PASiC coagulant at optimum concentration of 1–5 ml/L was capable of removing TOC, COD, U.V., and turbidity from raw water by 93.77, 93.5, 63 and 95 %, respectively. In contrast, EC process, removed TOC, COD, UV and turbidity from raw water by 89, 99.75, 37 and 50%, respectively. The pilot-scale results demonstrated the significant advantage of PASiC compared to EC process in removal of NOM and turbidity form raw water. Residual aluminum in finished water was below the recommended WHO guidelines 0.2 mg/L for both processes. Finally it can be concluded that PASiC and EC process are reliable, efficient and cost-effective methods for removal of NOM from surface water.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
