Comparison of H 2 production from ethanol and ethylene glycol on M/Pt(1 1 1) (M = Ni, Fe, Ti) bimetallic surfaces

Abstract

The reactions of ethylene glycol and ethanol have been studied on Fe/Pt(1 1 1) and Ti/Pt(1 1 1) bimetallic surfaces utilizing temperature programmed desorption (TPD). These results are compared to our previous studies on Ni/Pt(1 1 1) to illustrate the trend in the reforming activity on 3d-Pt bimetallic surfaces. The oxygenates decomposed on these surfaces to produce mainly H 2 and CO. The bimetallic surfaces were prepared by thermal evaporation of Fe or Ti onto Pt(1 1 1), using Auger electron spectroscopy (AES) to monitor surface compositions. Surfaces prepared by deposition of a monolayer of Fe or Ti on Pt(1 1 1), designated Fe–Pt–Pt(1 1 1) or Ti–Pt–Pt(1 1 1), displayed higher reforming activity for both ethylene glycol and ethanol than the corresponding subsurface monolayer Pt–Fe–Pt(1 1 1) and Pt–Ti–Pt(1 1 1) structures or clean Pt(1 1 1). The reforming yield increased as the surface d-band center, calculated from density functional theory (DFT), shifted closer to the Fermi level. The reforming selectivity of oxygenates, especially ethanol, began to decrease as the d-band center shifted closer to the Fermi level. Combining results in the current work with previous studies on Ni/Pt(1 1 1), a general criterion can be formulated for selecting 3d-Pt bimetallic surfaces with desirable reforming activity and selectivity.