Comparison of experimental techniques to increase the number of measurable confined fission tracks in zircon

Abstract

Abstract We compared three experimental techniques for increasing the number of measurable horizontal confined fission tracks (HCTs) in annealed and unannealed zircon. These techniques are irradiation of 252 Cf spontaneous fission fragments, irradiation of heavy ions ( 58 Ni 11+ ) using a tandem van de Graaff accelerator, and artificial fracturing of the zircon grains. All these techniques increased the number of measurable HCTs and they introduced no significant change in the measured length of annealed HCTs. For the samples with low track density (∼10 5 cm −2 ), heavy ion irradiation was far more effective than irradiation of 252 Cf fission fragments, because relatively long artificial tracks could be formed by the heavy ion irradiation. The artificial fracturing method is recommended when an accelerator facility is not easily available, because its effect was comparable to heavy ion irradiation and it is practicable in ordinary laboratories. Using these techniques, a preliminary comparison of annealing characteristics was performed for three zircon samples with different spontaneous track densities of ∼4·10 5 , ∼4·10 6 and ∼2·10 7 cm −2 (with fission track ages of 3.1, 22.8 and 367.6 Ma, respectively). The length reduction due to the thermal annealing of these zircons appeared to be different, with the possibility that the thermal stability of spontaneous fission tracks depends on the initial spontaneous track density (i.e., the higher the initial spontaneous track density of a sample, the slower the rate of track annealing).