Abstract
The present study aimed to evaluate the efficiency of advanced oxidation methods: Fenton, UV/ Fenton, and O3 /Fenton in the treatment of municipal wastewater. The effect of H2 O2:Fe2+ ratio, pH, and reaction time on chemical and biological parameters: chemical oxygen demand (COD), biological oxygen demand (BOD5), total coliform (TC), and Fecal coliform (FC) were evaluated in different advanced oxidation processes (AOPs) methods (Fenton, UV/Fenton, and O3 /Fenton). All parameters were measured according to the standards methods. The results obtained from the present study showed that the highest removal of pollutants was achieved in H2 O2:Fe2+ mole ratio of 0.7:1. Furthermore, the removal of COD, BOD5 were increased when pH increased from 4 to 7. Moreover, reaction time influenced COD, BOD5, TC, and FC until equilibrium time, however, its influence was not significant after equilibrium value. A comparative study on different AOP systems showed the order of highest to lowest removal efficiency of all parameters is as follows: O3 /H2 O2 / Fe2+ > UV/H2 O2 /Fe2+ > H2 O2 /Fe+2. It can be concluded that Fenton and its modified methods have the promising potential for advanced municipal wastewater treatment. © 2020 Desalination Publications. All rights reserved.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
