Abstract
Accurate road profiles are useful in vehicle design, such as for simulation of durability and ride quality. Laser/inertial profilometers typically record 1mm wide profiles. The question is how well such a profile matches perceived vehicle wheel roughness. The objective here was to create a more representative wheel track longitudinal profile. Simulated and measured wheel vibration was compared on a 6km long road. Simulations were made for several definitions of the profile. Results for single laser sensor profiles showed reasonable likeness to truck perceived roughness. By far the best likeness (14.5% better) was achieved when the profile was based on triangular 25%-50%-25% weighted data from three sensors in the wheel track. Clearly, vehicle engineers can benefit from using multiple laser profile sensors, instead of a single sensor. This will improve test accuracy, thus reducing vehicle design project lead times and costs.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
